You stand in front of a palm that is decades old and notice round holes near the frond bases, with a sticky brown liquid running from them down the trunk. Weeks later the crown leans slightly or a large frond snaps, and someone may suggest it is red palm weevil. A close look shows the symptoms are different: clear round holes and a clean larval tunnel, with no strong fermenting smell and no chewed fibre.
Palm stem borer in short:
- The sign: small holes in the trunk and frond bases oozing brown fluid and sawdust, with yellowing inner fronds.
- The danger: larvae tunnel inside the trunk and weaken the palm, and heavy infestations can hollow the stem.
- Treatment: clean infested frond bases, then spray the trunk and frond bases with a suitable insecticide until fully covered.
These may be stem and frond borers, which work quietly in neglected palms. The best known is the longhorn date palm stem borer (Jebusaea hammerschmidti). In this article we tell the different palm borers apart, explain how to spot them early, and how to treat an infested palm and keep the others clean. Red palm weevil has its own article in the library and is not repeated here.
- The pest: a longhorn beetle whose larvae tunnel inside the palm trunk and feed on its tissue from within, weakening the trunk.
- The sign: holes in the trunk with brown liquid running from them, and wood frass at the base of offshoots and fronds.
- The risk: the damage is internal and hidden, and may only be found after a large part of the trunk is ruined or the crown leans.
- Timing: regular inspection during the adults' active season and early action at the first hole work better than treatment after a heavy infestation.
- The rule: do not wound the palm without need and do not leave pruning cuts exposed, because wounds attract the insect. Treat the infestation as soon as it appears.
Which insects are the palm borers?
Not every larva inside the trunk is a red weevil. Palms have three main groups of borers that differ in where they attack and how to deal with them:
- Date palm stem borer (Jebusaea hammerschmidti): a longhorn beetle of the family Cerambycidae whose larvae tunnel in the frond bases and then in the trunk itself. Some researchers call it Pseudophilus testaceus.
- Rhinoceros beetle (Oryctes): the adult bores into fruit stalks and frond bases, while the larvae live in decaying organic matter and dead palms.
- Frond borer (Phonapate frontalis): of the family Bostrichidae. It attacks date fruit stalks and the midribs of green fronds, and also lives on pomegranate and grape.
What they share is a preference for old, tired and neglected palms, and damage that is slow but cumulative. It starts with holes and ends with a brittle trunk.
The longhorn stem borer: what we know about it
This is the most dangerous borer of the group, and losses are said to reach 90% in humid, neglected groves. It feeds only on date palm.
What does it look like?
The adult is a large reddish-brown beetle up to about 4.5 cm long, and the male's antennae are longer than its body. The larva is creamy white, legless and cylindrical, may reach about 5 cm, and has a small brown head.
Life cycle
The insect has one generation a year. The female lays her eggs singly in cracks in the trunk, frond bases and fibre, and they hatch after about two weeks. The larvae move inside and spend most of the year in the tunnels. In spring they pupate for about three weeks, then the adults emerge around May, leaving round exit holes.
Damage to the palm
The larvae tear the tissue that carries water and nutrients, so the palm weakens and its yield drops. When many larvae gather in one spot the trunk is hollowed and may break in the wind. The holes also open the way for fungi and bacteria, and shelter rhinoceros beetles that weaken the palm further.
How do we spot an infestation early?
Regular inspection of old palms is worth more than late treatment. These are the signs to look for at the frond bases and the lower trunk:
- Round holes: circular openings sized to the larva, either its entry point or the adult's exit.
- Sticky brown liquid: it runs from the holes and dries as dark streaks on the trunk.
- Wood frass: fine droppings at the base of the hole or on the ground under the palm.
- Fronds that lean or snap: especially the lower fronds around the affected spots.
- General weakness in the crown: gradual yellowing, poor growth and small bunches in the bearing season.
If you see wide holes with a fermenting smell, chewed fibre inside the trunk and a sudden collapse of the crown, suspect red palm weevil and have it confirmed before doing anything.
Borer or red palm weevil: how to tell
Confusing the two pests can cost the grower a whole palm, because the treatment for one differs from the other. The main field differences:
- Shape of the hole: the borer leaves regular round holes. The weevil leaves irregular openings in the heart of the crown and the soft frond bases.
- Smell: the weevil gives off a sharp fermenting smell with reddish-brown liquid. The borer's sticky brown liquid has a milder smell.
- Tissue inside: with the weevil, chewed fibre soaked in sap. With the borer, fairly dry tunnels with frass in them.
- Where it collapses: the weevil finishes the heart and the crown falls. The borer weakens the trunk gradually before it breaks.
If you are still unsure, ask an agricultural engineer. A wrong diagnosis may delay weevil treatment or cut down a palm that could be saved.
It is worth remembering that these borers do not kill a palm in one season. They drain it year after year. That is why in many groves a palm looks fine from a distance while inside it is tunnelled from base to crown. Inspecting twice a year saves you a whole palm, because every sign caught early means fewer tunnels and a shorter treatment.
The treatment plan, step by step
Insecticide alone will not save a neglected palm. We advise a three-stage plan that starts with cleaning and ends with follow-up, applied in winter or early spring before the adults emerge.
- Mark the affected spots: inspect the trunk and frond bases and mark every hole with liquid or fresh frass.
- Clean the entrance: remove the dead, decayed part as far as needed, and pull out the packed frass with a flexible wire or a thin tool.
- Treat the tunnel from inside: inject the diluted insecticide into each hole with a syringe or thin funnel until it reaches the larva, then plug the opening with mud or putty so the effect stays inside the trunk.
- Spray the frond bases: wet the trunk and fibre around the affected spots with the insecticide solution to kill eggs and young larvae.
- Remove the shelter: clear piles of decaying organic manure and dead palms from the farm, because they are where rhinoceros beetles breed.
- Inspect again after two weeks: if there is new liquid or fresh frass, repeat the treatment at that spot.
After treatment, do not leave the trunk unwatched. Follow the treated spots for at least three weeks and check whether the brown liquid has stopped and whether new frass has appeared. If the holes dry out and the plugs stay in place, the larva is dead. If the oozing continues, repeat the treatment, and consider having a specialist assess the strength of the trunk before the palm falls on a building or a car.
Prevention: how do we protect a healthy palm?
Prevention rests on two things: a strong palm and a clean site. Insects always go for the weak one.
- Regular care: balanced fertilising and irrigation with periodic pruning keeps the palm strong and reduces entry points for the borer.
- Avoid wounds: large wounds in the trunk after pruning or when separating offshoots are a gateway for infestation, so disinfect and cover them.
- Remove dead palms: a dead or heavily infested palm is cut and burned in winter or early spring before the beetles emerge.
- Light traps: useful for monitoring rhinoceros beetles, which are drawn to light in the warm months, and they reduce adult activity in the grove.
- Watch new palms: young offshoots brought from unknown sources may carry eggs or larvae, so inspect them before planting.
Remember that a weak palm is exposed to other pests too, such as dubas bug and dust mite on palms, as well as the wood-boring beetles that take advantage of weak trunks.
Palm stem borer insecticide rates
- Bifenthrin 200 g/L SC: 1 to 1.5 ml per litre of water, spraying the trunk and frond bases to full coverage.
- Bifenthrin 10% EC: 50 to 250 ml per 100 litres of water depending on the crop and pest, with a pre-harvest interval of 7 to 21 days.
- Encapsulated lambda-cyhalothrin 10% CS: 20 to 25 ml per 100 litres of water against stem borers and caterpillars.
- How to spray: aim at the holes, frond bases and leaf-base stubs, and repeat if brown fluid starts oozing from new holes.
Products from Orkida
At Orkida we choose insecticides that contact the larva inside the tunnel and hold on the fibre and trunk, not the systemic products used for red palm weevil injection. These are our picks:
- Talstar 100 EC from FMC: bifenthrin 10%, a contact and stomach insecticide used on palms with a safety interval of 14 to 21 days. We use it as a diluted emulsion injected into the holes and sprayed on the frond bases and fibre.
- Warrior 10 CS from Syngenta: lambda-cyhalothrin in microcapsules that release the active ingredient gradually, so it lasts longer on the trunk and fibre than ordinary emulsions. We prefer it for spraying frond bases on palms that are attacked repeatedly, and for alternating with Talstar so the pest does not adapt to a single group.
- Brigadier 200 SC from FMC: combines bifenthrin and imidacloprid. We use it on palms carrying more than one pest at once, where it kills exposed insects quickly and protects the palm from the sucking pests that exploit its weakness.
- Eco Spray Turbo 20-litre electric backpack sprayer: steady pressure and internal agitation of the mix. It reaches the trunk and frond bases on low palms and offshoots without the effort of hand pumping.
Keep to the rates in the rates section and the safety interval before harvest, because a bearing palm is treated with care. Tall palms that a backpack sprayer cannot reach need high-reach spraying equipment.
Frequently asked questions
Can treatment save a palm with a hollowed trunk?
If the hollow is limited and the heart is still sound, the palm recovers with treatment and care. If the hollow has reached a level that threatens its stability, it is better to remove it to protect the neighbouring palms and the safety of the site.
Can borers and red palm weevil live in the same palm?
Yes. A weak palm attracts both pests, and the borer's holes may open an entry for the weevil. That is why we inspect the whole palm and do not stop at treating the visible holes.
When should I treat: winter or summer?
The best time is from winter to early spring, when the larvae are inside the tunnels before they turn into adults. Treatment at the peak of summer is less effective and harder on the palm.
What do rhinoceros beetles have to do with the stem borer?
Rhinoceros beetles (Oryctes) use the holes and dead spots the borer leaves, and their larvae breed in decaying matter. Clearing the farm of manure residue and dead trunks therefore protects the palms from both pests.
Are light traps enough?
Not on their own. They are a tool for monitoring and reducing adult numbers, but the larvae inside the trunk need direct treatment and a clean farm.
Do new offshoots help an infested palm?
Offshoots give you the palm of the future, but they do not cure the infested mother. They are best separated carefully without large wounds in the trunk, and planted away from infested palms so the larvae do not move to them.
Does the borer move from one palm to its neighbour?
The adults fly between neighbouring palms, especially in early summer, which is why control works when it covers the whole grove and not a single palm.
Image source: Wikimedia Commons (Creative Commons)
What is the best insecticide for palm stem borers?
A contact pyrethroid such as bifenthrin or lambda-cyhalothrin, sprayed directly on the holes and frond bases, so it reaches larvae at tunnel entrances and adults on the trunk.
How do I spray a palm infested with borers?
Clean infested leaf-base stubs and frond bases first, then spray the trunk from bottom to top focusing on the holes, ideally with a backpack sprayer at steady pressure so the solution reaches the frond bases.