- Two-stroke petrol chainsaw TANAKA Plus model CN-45E, a practical petrol chainsaw for medium-duty cutting on farms, in gardens and at rest houses. It runs on a two-stroke (2T) petrol engine with a 16-inch (40 cm) guide bar and is used for cutting firewood and timber and felling small to medium trees. Suitable for regular users and farm owners who need a dependable chainsaw for outdoor work without electricity. Its design gives good control and stability during work.
Key Features
- Two-stroke (2T) petrol engine suitable for outdoor work
- 16-inch (40 cm) guide bar for cutting firewood and timber
- Chain brake for greater safety during operation
- Automatic chain lubrication with a separate oil tank
- Two-handle design for better stability and control
- Works without electricity, ideal for open and remote locations
Specifications
- Brand: TANAKA Plus
- Model: CN-45E
- Saw type: Petrol chainsaw
- Engine type: Two-stroke (2T)
- Bar length: 16 in (≈ 40 cm)
- Safety system: Chain brake
- Chain lubrication: Automatic – separate oil tank
- Fuel type: Petrol + two-stroke oil
- Fuel mixing ratio: 1 : 25 (oil : petrol)
- Starting method: Manual recoil (pull-cord) start
- Country of manufacture: China
Directions for Use
- Prepare the fuel mixture at a ratio of 1 : 25 (2T oil to petrol).
- Fill the fuel tank with the prepared mixture.
- Fill the chain oil tank with chainsaw bar and chain oil.
- Engage the chain brake, then pull the starter cord until the engine starts.
- After starting, release the chain brake and begin cutting gradually, holding the saw with both hands.
Orkida Tip
- This chainsaw is suitable for medium-duty work, not heavy industrial use. Keeping the correct mixing ratio and using dedicated chain oil greatly extends the life of the engine and chain.
Safety Warnings
- Never run the saw on petrol alone without 2T oil.
- Never run it without chain lubricating oil.
- Do not use indoors or in enclosed spaces.
- Wear gloves, safety glasses and ear protection during operation.
- Not recommended for long continuous operation without breaks.