- Two-stroke petrol chainsaw GRANADA model 180, a practical petrol chainsaw for outdoor cutting work. It runs on a two-stroke (2T) engine with a 16-inch (40 cm) cutting bar and chain. It is used for cutting firewood and timber and felling trees on farms, in gardens and at rest houses. It runs on petrol with no need for electricity, making it suitable for open areas and medium-duty work. Its practical design gives regular users good control during use.
Key Features
- Powered by a two-stroke (2T) petrol engine suitable for outdoor work
- 16-inch (40 cm) guide bar for cutting firewood and timber
- Chain brake for greater safety during operation
- Separate oil tank for automatic chain lubrication during work
- Two-handle design for better stability and control during use
- Needs no electricity, ideal for farms and open areas
Specifications
- Brand: GRANADA
- Model: 180
- Engine type: Petrol – two-stroke (2T)
- Bar length: 16 in (about 40 cm)
- Cutting system: Saw chain
- Safety system: Chain brake
- Lubrication system: Separate oil tank for chain lubrication
- Fuel type: Petrol mixed with 2T oil
- Starting method: Manual recoil (pull-cord) start
- Country of manufacture: China
Directions for Use
- Mix petrol + two-stroke (2T) oil at a ratio of 1 : 25 (1 litre petrol + 40 ml 2T oil).
- Fill the fuel tank with the prepared mixture.
- Fill the chain oil tank with dedicated bar and chain oil.
- Engage the chain brake, then pull the starter cord.
- After starting, release the brake and begin cutting gradually while holding the saw firmly.
Orkida Tip
- To keep the chainsaw efficient and extend its life, always use 2T oil made for chainsaws and a suitable chain oil, and clean the chain after every use.
Warnings
- Do not run the saw on petrol alone without adding 2T oil.
- Never run the saw without chain lubricating oil.
- Not intended for heavy industrial use or long continuous operation.
- For use in open areas only.
- Wearing gloves and safety glasses during operation is recommended.