Plants need micronutrients in very small amounts, but a shortage of any one of them stops growth and weakens flowering and fruit even when you feed full NPK. The problem is that most people add them at random, so either the plant does not benefit or they overdo it until it becomes toxic.
In this article we explain what micronutrients are, what each one does, the difference between chelated and non-chelated forms, and how and when to apply them at the right rates.
What are micronutrients?
Plant nutrients fall into three groups:
- Macronutrients: nitrogen, phosphorus and potassium (NPK), needed in large amounts.
- Secondary nutrients: calcium, magnesium and sulphur.
- Micronutrients: iron, zinc, manganese, copper, boron and molybdenum, needed in parts per million but essential.
What each micronutrient does
Iron (Fe)
- Essential for making chlorophyll (the green colour).
- Deficiency is the most common problem in alkaline soil: young leaves turn yellow while the veins stay green.
Zinc (Zn)
- Important for growth hormones and stem elongation.
- Deficiency causes small, crowded leaves at the shoot tips (rosetting) and short internodes.
Manganese (Mn)
- Involved in photosynthesis.
- Deficiency causes mottled yellowing between the veins with small dead spots.
Copper (Cu)
- Important for strong cell walls and pollination.
- Deficiency is rare and shows as dieback of shoot tips and pale leaves.
Boron (B)
- Essential for flowering and fruit set, seed formation and sugar transport.
- Deficiency causes death of growing tips, cracked fruit and flower drop.
- Note: the gap between deficiency and toxicity is very small for boron, so do not exceed the dose.
Molybdenum (Mo)
- Needed for the plant to use nitrogen, and by legumes to fix nitrogen.
- Deficiency is rare and looks like nitrogen deficiency.
For detailed diagnosis and telling deficiencies apart from diseases, see our article on yellowing plant leaves.
Why do micronutrient deficiencies happen?
- Alkaline, calcareous soil: the main cause. The nutrient is present but locked up and not absorbed.
- Poor sandy soil with little organic matter.
- Too much phosphorus: reduces uptake of zinc and iron.
- Cold or waterlogged soil: roots do not work properly.
- High-yielding crops: they draw nutrients from the soil quickly.
Chelated vs non-chelated: what is the difference?
A chelated nutrient is protected by an organic molecule that keeps it soluble, so it is not locked up in the soil and the plant absorbs it easily. A non-chelated form (such as iron sulphate) gets locked up quickly in alkaline soil.
Types of chelate by soil pH:
- EDTA: excellent for foliar sprays and neutral soil. Weak in alkaline soil.
- DTPA: stable up to about pH 7.5.
- EDDHA: the strongest iron chelate for alkaline soil, stable up to pH 10.
- Amino-acid chelates: high uptake through the leaves.
Practical rule: for foliar sprays use an EDTA mix. For iron in alkaline soil, apply EDDHA through irrigation.
How to apply micronutrients
Foliar spray
- The fastest way to correct a deficiency, with results within days.
- Spray early morning or late afternoon, never in heat or strong sun.
- Cover both sides of the leaves until wet.
- Repeat every 10 to 14 days if the deficiency is obvious.
Soil or irrigation application
- Longer-lasting, and suitable for EDDHA iron and soil-applied boron.
- Apply around the root zone and water afterwards.
When to apply them
- Early vegetative growth: a micronutrient mix.
- Before flowering: boron and zinc are important for fruit set.
- When deficiency symptoms appear: a quick foliar correction, followed by a soil application.
Correct rates (examples from our products)
- Chelated micronutrient mix (iron, zinc, manganese, copper, boron, magnesium):
- Vegetables and field crops: 0.75 g per litre (750 g per 1,000 litres) after growth starts.
- Fruit trees: 1 g per litre before growth starts.
- Citrus, grapes and olives: 0.5 g per litre.
- Boron (soil powder): 2 g per litre, repeated every 60 days.
- Magnesium sulphate (spray): 1 to 2 g per litre, repeated every 10 to 14 days.
- EDDHA iron: 15 to 30 g around the roots of a tree, or 5 to 10 g per square metre through irrigation for crops.
- Amino acids + micronutrients (liquid): 2 to 3 ml per litre as a spray.
Common mistakes
- Overdosing boron because it helps fruit set, which burns leaf edges.
- Spraying ordinary iron instead of chelated iron on alkaline soil.
- Mixing micronutrients with concentrated phosphate fertilizers in the same tank, which causes precipitation.
- Spraying at midday, which burns leaves and evaporates the solution before it is absorbed.
- Treating the symptom, not the cause: if the soil is alkaline, the deficiency will return unless you improve the soil.
Products from Orkida
- Bavaria Special Chelated Micronutrients, 1 kg: EDTA iron, zinc, manganese and copper with magnesium and boron. Vegetables 750 g per 1,000 litres, trees 1 kg per 1,000 litres.
- Bavaria 6% EDDHA Chelated Iron, 1 kg: for alkaline soil; 15 to 30 g around the roots of a tree.
- Dolphin Boron, 1 kg: 10% boron with zinc and molybdenum; 2 g per litre every 60 days.
- Watani MgSol Magnesium Sulphate, 25 kg: 16% magnesium with sulphur and zinc; spray 1 to 2 kg per 1,000 litres every 10 to 14 days.
- Nectar Micro Amino Acids + Micronutrients, 1 L: 2 to 3 litres per hectare in 1,000 litres of water as a spray, or by drip.
Frequently Asked Questions
What are micronutrients for plants?
Iron, zinc, manganese, copper, boron and molybdenum. Plants need them in very small amounts, but a shortage stops growth and weakens flowering.
When should I spray micronutrients?
At the start of vegetative growth, before flowering, and when deficiency symptoms appear. Spray early morning or late afternoon, and repeat every 10 to 14 days if the deficiency is clear.
Can I spray micronutrients with a pesticide?
Most chelated mixes are compatible, but test a small amount in a container first. If the solution turns cloudy or forms a deposit, do not mix them.
What is the difference between EDTA and EDDHA?
EDTA suits foliar sprays and neutral soil. EDDHA is designed for iron in alkaline soil because it stays stable up to pH 10.
Can too many micronutrients harm plants?
Yes, especially boron and copper. Excess causes toxicity and leaf burn, so stick to the rate.
Read next
- Yellowing Plant Leaves and Nutrient Deficiencies: Causes, Diagnosis and Treatment
- Chelated Iron: When Plants Need It, Choosing the Right Type and How to Apply It
- Calcium Boron Fertiliser: Benefits for Fruit Set and Fruit Quality, and When to Spray
- Magnesium Deficiency in Plants: Symptoms, Treatment and the Best Magnesium Fertiliser