Electric Hedge Trimmers: The Right Way to Trim Hedges and Shrubs
HESHAM MAHMOUD
HESHAM MAHMOUD
15 November 2026

A green hedge (shrubs along a wall or the edges of paths) gives a garden a tidy look, but trimming it with hand shears takes hours. An electric hedge trimmer cuts with a long blade and dual-action teeth, giving you a level surface and a neat shape in less time.

In this article we explain when to use a hedge trimmer, how to trim correctly, and safety and maintenance tips.

What is an electric hedge trimmer?

  • An electric motor drives a long blade with teeth on both sides.
  • Dual-action blade: less vibration and a smoother, balanced cut.
  • Runs on electricity with no fuel or oil mixing, and is quieter than petrol equipment.

When to use it

  • Trimming hedges, shrubs and ornamental plants.
  • Shaping hedges into straight lines or regular forms.
  • Not for thick branches or hard wood: the maximum cutting thickness is roughly 18 to 20 mm on the IKRA IHS 650. For thicker branches use pruning shears or a saw.

IKRA IHS 650 specifications

  • Power: 650 W.
  • Blade length: 61 cm, with an actual cutting length of about 55 to 57 cm.
  • Maximum cutting thickness: roughly 18 to 20 mm.
  • Approximate weight: 3 to 3.5 kg.
  • Safety system to prevent accidental starting.

How to trim correctly

  1. Cut the sides first, then the top, to keep a balanced shape and stop clippings falling onto the finished sides.
  2. Move the blade in straight lines along the hedge.
  3. Trim in stages: several light cuts are better than removing a lot at once.
  4. Keep the base of the hedge slightly wider than the top so sunlight reaches the lower leaves and they do not dry out.
  5. Trim regularly rather than letting the hedge grow too long.

Safety

  • Wear gloves and safety glasses.
  • Stand firmly and hold both handles securely.
  • Watch the cable and always keep it behind you, away from the blade.
  • Do not use it in wet conditions or in the rain.
  • Unplug it before cleaning or maintenance.

Maintenance

  • Clean the blade after every use of leaf debris and sap.
  • Oil the blade lightly before storage so it does not rust.
  • Store it somewhere dry with the blade cover on.

Products from Orkida

Frequently Asked Questions

What is the difference between a hedge trimmer and pruning shears?

A hedge trimmer trims leaves and thin shoots over a wide area; pruning shears cut individual thicker branches.

How thick a branch can a hedge trimmer cut?

On the IKRA IHS 650, roughly up to 18 to 20 mm.

Should I start trimming from the top or the sides?

From the sides first, then the top, so the shape comes out balanced.

How often should I trim a hedge?

Light, regular trimming is better than one big cut.

Can I use it when the hedge is wet?

No, do not use it in wet conditions or in the rain because it is electric.

Read next